Electrotech EDM services Ltd Electrotech EDM services Ltd Electrotech EDM services Ltd Electrotech EDM services Ltd Home w-spark@electrotech-edm.co.uk
 
 
Wire Erosion Capacity List  
     

Mitsubishi 110 SA Wire Eroder

 

Mitsubishi 110 SZ Wire Eroder

450 x 320 x 265 submerged machine with automatic wire feed.   450 x 320 x 265 submerged machine with automatic wire feed and FS.
     
Mitsubishi 110 SA Spark Eroder   Mitsubishi 110 SZ Spark Eroder
     
 

Mitsubishi FX 20 Wire Eroder

 

Mitsubishi FA 20 Wire Eroder

500 x 350 x 450 submerged machine with automatic wire feed.   500 x 350 x 300 submerged machine with automatic wire feed.
     
Mitsubishi FX 20 Wire Eroder   Mitsubishi FA 20 Wire Eroder
     
 
     

Mitsubishi FX 10 Wire Eroder

 

Mitsubishi RA 90 Wire Eroder

350 x 250 x 220 submerged machine with automatic wire feed.   320 x 250 x 165 open flush machine with automatic wire feed.
     
Mitsubishi FX 10 Wire Eroder   Mitsubishi RA 90 Wire Eroder
     
 
     

Fast Hole Drilling Machine (EDM)

   
Hole range = 0.3mm to 3.0mm through a maximum of 350mm thick hard or soft materials.    
     
EDM Fast Hole Drilling Machine    
 
 

The wire erosion machines above are DNC linked to a CAM programming system. NC programmes can be produced from engineering drawings or from customer DXF or IGES data. Components can also be digitised to produce exact copies.

 
 
 
To Discuss Your Wire Erosion Requirements:
phone
Phone: SHEFFIELD 0114 261 7071
e-mail